COD in 30 minutes

COD in 30 minutes !

Thermoreactor with microprocessor controlled temperature and heating time and digital display

The thermoreactor ECO 6 is purposely designed for COD analysis and also for wet digestion of samples in the evaluation of metallic and non metallic elements in organic and inorganic materials (ores, alloys, animal feed, soils, sediments, tissues, etc.).
The instrument allows setting of time and temperature in wide intervals with high precision and reproductivity.
It allows simultaneous operation for 6 samples of 20 ml. The precision is very similar to the precision obtained with the traditional method employing large volumes and reflux refrigerator, although saving reagents.

Suitable for
EPA, APHA, AWWA, WEF

Specifications

Epoxy painted metal structure studied and tested in order to give to the instrument an excellent resistance to the attack of chemical and mechanical agents and to corrosion in general
Setting of temperature by an electronic programmer, from room temperature to 200°C, resolution 1°C
Thermal stability:	±0.5°C at 160°C
Visualization of reached temperature
Setting of heating time:	up to 199 minutes
Continuous operation is possible
Acoustic signal of end of cycle with automatic switch off
Power:	700 W
Weight:	5.6 kg
The instrument is supplied together with the COD test method and an operating manual to support the user. In order to be operative it is necessary to order the complementary parts.